Chinese Professional Aluminum Flux Cored Welding Wire - E71T-1 Use is CO2 flux cored wire for welding titanium – Hucheng

  • Detail

E501T-1, E71T-1
Use is CO2 flux cored wire for welding titanium. High deposition efficiency, excellent all-position welding performance can also be vertical down welding. For ships, pressure vessels, mechanical equipment, steel bridges, steel low carbon steel and 490MPa grade high strength steel welding. Standard:
GB / T: E501T-1
AWS: E71T-1

Package Package Silk panel Net weight
Φ1.0~1.6(mm) D100mm D200mm D270mm D300mm K300mm 1 kg, 5 kg, 15 kg18 kg, 20 kg


Chemical (%) C Mn Si P S
≤0.10 ≤1.75 ≤0.75 ≤0.03 ≤0.03  
Deposited metal Mechanical properties Yield strengthσ0.2(Mpa) Tensile strengthσb(Mpa) Elongationδ5(%) AKV Impact Energy(J)
≥400 ≥480 ≥22 ≥47(0℃)



Wire diameter(mm) Φ1.0 φ1.2 φ1.4 φ1.6 Welding position
Welding current(AMP.) 80~250 120~300 160~400 190~450
Notes: 1 wire into the plant must be stored in a dry environment, not just open the disk waterproof wire welding package 2 should be removed before welding surface of the oil, rust, moisture and other impurities
3. The use of CO2 gas, CO2 gas purity of 99.98%.
4 CO2 protection welding gas flow should be controlled in 20-25L/min.
5 out of wire length should be controlled at 15-25mm range.
6 to be preheated before welding to 150-300 ℃, after welding to be tempered by 700-740 ℃.

We support OEM production, so we can purchase materials according to your needs to achieve more suitable prices.

We have a very strict test system, and the product yield is 95%. GB50-6 is our QC standard.

We use a layered design for barreled welding wire to ensure better use and preservation of the product.